Moulder Question Paper and Answer Key

Question Paper Code: 18/2024/OL
Category Code: 094/2023
Exam: Moulder
Date of Test 29-02-2024
Department Kerala State Water Transport

Question1:-PPE 5 stands for
        B:-Safety foot wear
        C:-Eyes and face protection
        D:-Ears protection
        Correct Answer:- Option-C

Question2:-ABC stands for
        A:-Airway, Bleeding, Circulation
        B:-Airway, Breathing, Circulation
        C:-Air circulation, Bleeding, Control
        D:-Air passage, Bleeding, Circulation
        Correct Answer:- Option-B

Question3:-Class C fire is used for
        A:-Involving metals
        B:-Flammable liquids
        C:-Gas and liquid gas
        D:-Wood, paper, cloth etc.
        Correct Answer:- Option-C

Question4:-The fuel used in a blacksmiths hearth for hand forging is
        C:-Stone coal
        D:-Coconut shell
        Correct Answer:- Option-B

Question5:-The function of fuel in forging is
        A:-To make fire
        B:-To obtain certain heat
        C:-To make the job
        D:-To harden the job
        Correct Answer:- Option-B

Question6:-The anvil is made out of
        A:-Mild steel
        B:-Wrought iron
        C:-Cast steel
        D:-High carbon steel
        Correct Answer:- Option-C

Question7:-The anvil is used for
        A:-To support the job
        B:-To beat the job
        C:-Finishing the job
        D:-To cool the job
        Correct Answer:- Option-A

Question8:-The beak of anvil used for
        A:-Drawing out
        B:-Bending to round shape
        C:-Bending the work at right angles
        D:-Inserting hardie and stakes
        Correct Answer:- Option-B

Question9:-Swage blocks are made out of
        A:-Wrought iron
        B:-Cast iron
        C:-Pig iron
        Correct Answer:- Option-B

Question10:-The usage of grooves and slots provided on the swage block
        A:-To cool the job
        B:-To shape the job
        C:-To cut the job
        D:-To upset the job
        Correct Answer:- Option-B

Question11:-Tongs are used for
        A:-To hold the job
        B:-To beat the job
        C:-Drawing out
        D:-To cut off
        Correct Answer:- Option-A

Question12:-Flat tongs are used
        A:-To hold circular job
        B:-Rectangular jobs
        C:-Heavy jobs
        D:-Light weight jobs
        Correct Answer:- Option-B

Question13:-The specification of hammer is
        A:-Its weight
        B:-Weight and shape of peen
        C:-Shape and size
        D:-Its shape
        Correct Answer:- Option-B

Question14:-The weight of hammer is stamped on
        Correct Answer:- Option-C

Question15:-The slight convexity is given to the cutting edge of the chisel is
        A:-Cut curved surfaces
        B:-Cut sharp corners
        C:-Prevent digging of the ends
        D:-Allow the lubricant to enter
        Correct Answer:- Option-C

Question16:-The clearance angle of a chisel is the angle between
        A:-The working surface and the bottom surface of the cutting edge
        B:-Working surface and the top of the cutting edge
        C:-Working surface perpendicular to the cutting edge
        D:-Line perpendicular to the working surface and bottom of the cutting edge
        Correct Answer:- Option-D

Question17:-The pitch of the wave set blade is
        A:-1 mm
        B:-0.8 mm
        C:-2 mm
        D:-1.8 mm
        Correct Answer:- Option-B

Question18:-Hacksaw blades are specified by
        A:-Width, thickness, length
        B:-Length, pitch and type of material
        C:-Length, pitch and width
        D:-Length, pitch and thickness
        Correct Answer:- Option-B

Question19:-The angle of centre punch is
        Correct Answer:- Option-C

Question20:-The angle of dot punch is
        Correct Answer:- Option-A

Question21:-The tool used to measure length in forging shop is
        A:-Steel rule
        B:-Brass rule
        C:-Steel tape
        D:-Hook rule
        Correct Answer:- Option-B

Question22:-The tool used for transferring and stepping off distances
        A:-Outside caliper
        B:-Inside caliper
        D:-Jenny caliper
        Correct Answer:- Option-C

Question23:-Files are classified according to their
        A:-Cut, grade, width and length
        B:-Length, shape, cut and grade
        C:-Length, shape, width and cut
        D:-Length, grade and width
        Correct Answer:- Option-B

Question24:-The second cut file is used for
        A:-Heavy reduction of metals
        B:-To give good finish
        C:-Larger quantity of metal
        D:-Remove small quantity of metal
        Correct Answer:- Option-B

Question25:-In double cut file, the overcut is
        Correct Answer:- Option-B

Question26:-The file used in cases where there is a heavy reduction of metal is
        A:-Rough file
        B:-Bastard file
        C:-Second cut file
        D:-Smooth file
        Correct Answer:- Option-B

Question27:-The other name of jenny caliper is
        A:-Outside caliper
        B:-Inside caliper
        C:-Hermaphrodite caliper
        D:-Firm joint type caliper
        Correct Answer:- Option-C

Question28:-Bench vice is made of
        A:-Wrought iron
        B:-Pig iron
        C:-High speed steel
        D:-Cast iron
        Correct Answer:- Option-D

Question29:-The included angle of VEE in v-blocks is
        Correct Answer:- Option-C

Question30:-The accuracy of trysquare is
        A:-0.001 mm per 10 mm length
        B:-0.002 mm per 10 mm length
        C:-0.01 mm per 10 mm length
        D:-0.02 mm per 10 mm length
        Correct Answer:- Option-B

Question31:-"Never lean on the machine" is comes under
        A:-Machine safety
        B:-General safety
        C:-Personal safety
        D:-Road safety
        Correct Answer:- Option-C

Question32:-Which of the statement mentioned is not correct ?
1. Do not give an unconscious person any food or drink
2. Splash water on the face of the unconscious person
3. Do not leave the person alone
4. Do not place a pillow under the head of the unconscious person
        A:-1 & 2
        B:-3 & 4
        C:-2 & 3
        D:-2 only
        Correct Answer:- Option-D

Question33:-Unguarded machinery is a
        A:-Physical hazard
        B:-Physiological hazard
        C:-Ergonomic hazard
        D:-Mechanical hazard
        Correct Answer:- Option-D

Question34:-The three factors of collision causes are
1. Roads
2. Vehicles
3. Pedestrians
4. Drivers
        A:-1, 2 & 3
        B:-1, 2 & 4
        C:-2, 3 & 4
        D:-1, 3 & 4
        Correct Answer:- Option-B

Question35:-A material which can permanently be extended in all directions, the material is said to be
        Correct Answer:- Option-B

Question36:-Because of the __________ content, cast iron provides an excellent bearing and sliding surface.
        Correct Answer:- Option-C

Question37:-The ultimate tensile strength of wrought iron is about
        A:-150 newton per
        B:-150 newton per sq.m
        C:-350 newton per
        D:-350 newton per
        Correct Answer:- Option-D

Question38:-In cartridge brass the percentage of copper and zinc is
        A:-50 : 50
        B:-60 : 40
        C:-70 : 30
        D:-40 : 60
        Correct Answer:- Option-C

Question39:-Which comes under chemical occupational hazard ?
        Correct Answer:- Option-D

Question40:-What is the use of strike-off-Bar ?
        A:-Remove the excess sand from mould
        B:-Sleek the mould
        C:-Ram the sand
        D:-Handle the sand
        Correct Answer:- Option-A

Question41:-What is the purpose of make denseners by same metal of casting ?
        A:-For safe and reliable
        B:-For modifying casting properties
        C:-Fuse and become part of casting
        D:-For casting smooth surfaces
        Correct Answer:- Option-C

Question42:-What is the abbreviation of OSI related to network system ?
        A:-Open Source Internet
        B:-Open System Interaction
        C:-Open Source Interconnection
        D:-Open System Interconnection
        Correct Answer:- Option-D

Question43:-In admirality gun metal the percentage of Tin is
        Correct Answer:- Option-A

Question44:-The solid solution of carbon in gamma iron are called
        Correct Answer:- Option-B

Question45:-Composite materials are classified according to
        A:-Size and shape of reinforcement
        B:-Type of matrix used
        D:-None of these
        Correct Answer:- Option-C

Question46:-When sand is in its natural moist state it is known as
        A:-Green sand
        B:-Dry sand
        C:-Facing sand
        D:-Black sand
        Correct Answer:- Option-A

Question47:-The heat treatment process which is used to increase the toughness
and to reduce brittleness is
        D:-None of these
        Correct Answer:- Option-B

Question48:-Which of the following cast iron cannot be machined ?
        A:-Grey cast iron
        B:-Malleable cast iron
        C:-White cast iron
        D:-Spheroidal graphite cast iron
        Correct Answer:- Option-C

Question49:-The purpose of adding wood flour to moulding sand is to improve
        D:-Hot strength
        Correct Answer:- Option-C

Question50:-Which of the following is not a defect if permeability is not enough ?
        A:-Gas holes
        B:-Slag inclusion
        C:-Surface blow
        Correct Answer:- Option-D

Question51:-The bottom of cupola is made up of which material ?
        A:-Cast iron
        B:-Whit iron
        C:-Pig iron
        D:-Mild iron
        Correct Answer:- Option-A

Question52:-Which is used for general purpose grinding of tough materials ?
        A:-Flux coating
        C:-Zinc chloride
        D:-Brown aluminium oxide
        Correct Answer:- Option-D

Question53:-The manufacture has marking on a grinding wheel as 'A36L5V'. The code 'V' represents the
        Correct Answer:- Option-B

Question54:-Which is the fuel of cupola furnace ?
        Correct Answer:- Option-C

Question55:-Which metal is used for making metal pattern ?
        B:-Highspeed steel
        Correct Answer:- Option-A

Question56:-Which of the following is the most pattern materials are corrosion prone ?
        D:-Grey cast iron
        Correct Answer:- Option-D

Question57:-A pattern carries which allowance for internal and external surfaces ?
        A:-Shrinkage allowance
        B:-Distortion allowance
        C:-Draft allowance
        D:-Machining allowance
        Correct Answer:- Option-C

Question58:-What is the use of core ?
        A:-Strength give to mould
        B:-Increase hardness to casting
        C:-Produce hollow casting
        D:-Helps to easily remove pattern
        Correct Answer:- Option-C

Question59:-What is the colour code of bins for waste paper segregation ?
        Correct Answer:- Option-D

Question60:-Which pattern allowance used for finishing the casting ?
        A:-Tapper allowance
        B:-Machining allowance
        C:-Shrinkage allowance
        D:-Distortion allowance
        Correct Answer:- Option-B

Question61:-Which material is used for making pattern for mass production ?
        Correct Answer:- Option-B

Question62:-Which is made out of the same pouring metal ?
        A:-Internal chills
        B:-External chills
        Correct Answer:- Option-A

Question63:-Which is used for uniform rate of cooling of a casting ?
        C:-Calcium carbide
        Correct Answer:- Option-D

Question64:-What is the advantage of open sand mould ?
        A:-Machining is difficult
        B:-No need box
        C:-Make intricate casting
        D:-Sand inclusion
        Correct Answer:- Option-B

Question65:-Which is used for assemble the split core box ?
        B:-Guide pins
        D:-Dowel pins and holes
        Correct Answer:- Option-D

Question66:-Which metal is used for making permanent mould ?
        A:-Alloy cast iron
        Correct Answer:- Option-A

Question67:-Which property of moulding sand is used for make the mould number of times ?
        A:-Green strength
        D:-Flow ability
        Correct Answer:- Option-C

Question68:-What is the advantage of machine moulding ?
        A:-More time
        B:-High production rate
        C:-High cost of product
        D:-Make intricate casting
        Correct Answer:- Option-B

Question69:-Which gate is called parting line gate ?
        A:-Step gate
        B:-Pencil gate
        C:-Horse shoe gate
        D:-Horn gate
        Correct Answer:- Option-C

Question70:-Which tool is make the pierced venting in core ?
        A:-Sharp wire
        B:-Sharp knife
        C:-Draw spike
        D:-Draw screw
        Correct Answer:- Option-A

Question71:-What is the advantage of stack mould ?
        A:-More time
        B:-More sand
        C:-Less production
        D:-Less boxes
        Correct Answer:- Option-D

Question72:-Which gating system is used for thin section castings ?
        A:-Skim bob gate
        B:-Bench gate
        C:-Shrink gate
        D:-Horn gate
        Correct Answer:- Option-B

Question73:-What is known as middle box of three box mould ?
        Correct Answer:- Option-D

Question74:-Which is used for withdraw the huge patterns from mould ?
        A:-Dowel pins
        C:-Lifting plate
        D:-Stop off piece
        Correct Answer:- Option-C

Question75:-What is the purpose of true centrifugal casting ?
        A:-Make hole in casting without core
        B:-More accuracy
        C:-More productivity
        D:-More surface finishing
        Correct Answer:- Option-A

Question76:-Which material is used for make the mould in continuous casting process ?
        B:-High speed steel
        Correct Answer:- Option-C

Question77:-Which property of moulding sand that particles of same attracting each other ?
        A:-Green strength
        Correct Answer:- Option-B

Question78:-Which material is makes for chill ?
        Correct Answer:- Option-A

Question79:-Which mould process the entire mould is prepared with the help of manpower ?
        A:-Machine mould process
        B:-Continuous casting
        C:-Hot chamber die casting
        D:-Bench mould process
        Correct Answer:- Option-D

Question80:-What is the reason for using the fine sand to make the mould ?
        A:-For hard surface
        B:-For rough surface
        C:-For fine surface
        D:-For medium surface
        Correct Answer:- Option-C

Question81:-Match List I with List II and select the correct answer from the codes given below.
                     List I                                    List II
(a) India's fastest flowing river             (i) Brahmaputra
(b) The red river in India                      (ii) Gaumukh
(c) The site of harappa is located         (iii) Teesta
      on the banks of river
(d) The Ganges river originates           (iv) Ravi
        A:-a – i, b – iv, c – ii, d – iii
        B:-a – ii, b – iii, c – iv, d – i
        C:-a – iii, b – i, c – iv, d – ii
        D:-a – iv, b – ii, c – i, d – iii
        Correct Answer:- Option-C

Question82:-The idea of 'trusteeship' is associated with
        A:-The economic idea of Karl Marx
        B:-The economic idea of Adam Smith
        C:-The economic idea of Mahatma Gandhi
        D:-The economic idea of Dadabhai Naoroji
        Correct Answer:- Option-C

Question83:-The first district in India without any poor residents as per the latest Multidimensional Poverty Index (MPI) released by the NITI Aayog (2021)
        Correct Answer:- Option-D

Question84:-Which pairs are incorrect ?
a. Atmanuthapam                             - Kuriakose Elias Chavara
b. Nijananda Vilasam                        - Kumaranasan
c. Gajendramoksham Vanchippattu  - Sree Narayana Guru
d. Lankamardanam                          - Nitya Chaithanyayathi
        A:-a and b
        B:-b and d
        C:-a and c
        D:-c and d
        Correct Answer:- Option-B

Question85:-There are four main kinds of soil that can be found in Kerala, which among is most fertile ?
        A:-Laterite soil
        B:-Alluvial soil
        C:-Forest soil
        D:-Red soil
        Correct Answer:- Option-B

Question86:-The primary objective of the SGRY Scheme is
A) To provide additional and supplementary wage employment and there by provide food security and improve nutritional levels in all rural areas.
B) To provide rural people with the right to document their residential properties so that they can use their property for economic purpose.
C) To provide pucca house to all who are houseless and living in dilapidated houses in rural areas.
        A:-A only
        B:-B only
        C:-A and B
        D:-C only
        Correct Answer:- Option-A

Question87:-Which of the books is not correctly matched with the Author ?
          Author                     Book
A. Mahatma Gandhi   - Hind Swaraj
B. Dadabhai Naoroji   -   Poverty and Unbritish Rule in India
C. Adam Smith           -   Principles of Economics
D. Karl Marx               -   Das Capital
        A:-Mahatma Gandhi - Hind Swaraj
        B:-Dadabhai Naoroji - Poverty and Unbritish Rule in India
        C:-Adam Smith - Principles of Economics
        D:-Karl Marx - Das Capital
        Correct Answer:- Option-C

Question88:-Consider the following statements related to Western Ghats and select the incorrect statement.
A. The mountain ranges run parallel to the Bay of Bengal.
B. The Anamudi peak is the highest peak in the Western Ghats.
C. The Western Ghats also known as the Sahyadri mountain ranges.
        A:-Only A is incorrect
        B:-Only B is incorrect
        C:-A and B are incorrect
        D:-Only C is incorrect
        Correct Answer:- Option-A

Question89:-Which of the following country has hosted the Commonwealth games maximum number of times ?
        Correct Answer:- Option-D

Question90:-Match List I with List II and select the correct answer from the codes given below.
             List I                                 List II
(a) Vaikunta Swamikal            (1) Atmavidya Sangham
(b) Brahmananda Sivayogi      (2) Araya Samudaya Sanghatana
(c) Pandit K.P. Karuppan         (3) Samatva Samajam
(d) Vagbhatanandan               (4) Anandamahasabha
        A:-a – 4, b – 1, c – 2, d – 3
        B:-a – 1, b – 4, c – 2, d – 3
        C:-a – 2, b – 3, c – 4, d – 1
        D:-a – 3, b – 4, c – 2, d – 1
        Correct Answer:- Option-D

Question91:-Arrange the following in chronological sequence and select the correct answer from the codes given below.
1. The Khilafat Movement
2. The Quit India Movement
3. Swadeshi Movement
4. The Civil Disobedience Movement
        A:-1, 4, 2, 3
        B:-2, 3, 4, 1
        C:-3, 1, 4, 2
        D:-4, 2, 1, 3
        Correct Answer:- Option-C

Question92:-The highest literary honour is given by the Kerala Sahitya Akademi, Government of Kerala
        A:-Odakkuzhal Award
        B:-The Ezhuthachan Puraskaram
        C:-Mundasseri Award
        D:-Vayalar Award
        Correct Answer:- Option-B

Question93:-Identify the Jet stream which is responsible for bringing western disturbances from the Mediterranean region into the Indian subcontinent.
        A:-Easterly Jet stream
        B:-EI-Nino Effect
        C:-Westerly Jet stream
        D:-Northern Jet stream
        Correct Answer:- Option-C

Question94:-Which of the Movement is correctly matched with the Reformers ?
          Movements                          Reformers
A. Prardhana Samaj             - Atmaram Pandurang
B. Satyashodak Samaj         - E.V. Ramaswami Naicker
C. Self Respect Movement - Jyotiba Phule
D. Hitakarini Samaj             - Viresalingam
        A:-A and D
        B:-B and C
        C:-B only
        D:-D only
        Correct Answer:- Option-A

Question95:-Which among the following statement is associated with KIIFB ?
A. A government owned financial institution to mobilize fund for infrastructural development.
B. A government agency for empowering industrial growth across Kerala.
C. To provide investment for projects in the state of Kerala in the sectors of irrigation, road, power, water supply, ports etc.
D. If provides support to businesses, export-import facilities etc.
        A:-B and C
        B:-A and C
        C:-B and D
        D:-A and D
        Correct Answer:- Option-B

Question96:-Match Column A with Column B.
         Column A                  Column B
a. Santhal Rebellion     (i) Malabar
b. Bhil Uprisings          (ii) Ranchi
c. Munda Uprisings     (iii) Rajmahal hills
d. Kurichya Rebellion (iv) Mangad hills
        A:-a – i, b – iii, c – iv, d – ii
        B:-a – ii, b – iii, c – i, d – iv
        C:-a – iv, b – i, c – iii, d – ii
        D:-a – iii, b – iv, c – ii, d – i
        Correct Answer:- Option-D

Question97:-With respect to "Nai Talim" consider the following statements.
A. Mahatma Gandhi's perspective of education is known as Nai Talim.
B. This system of education recommended free and compulsory education in mother tongue.
C. Implemented three language formula.
D. Education should be related to some productive occupations. Which of the above are correct ?
        A:-A, B and D
        B:-B, C and D
        C:-A, C and D
        D:-A, B and C
        Correct Answer:- Option-A

Question98:-With reference to the project 'Veda' consider the following statements.
A. The Veda SLV is a three stage, solid-propellant rocket.
B. 'Veda' means vehicle for Defence Application.
C. The Veda vehicle is intended for launching defence satellites into a lower orbit. Choose the correct answer from the codes given.
        A:-A and B only
        B:-B and C only
        C:-C only
        D:-A, B and C
        Correct Answer:- Option-D

Question99:-India's first Science city
        Correct Answer:- Option-C

Question100:-Which sports event is known as the "BWF Super Series" ?
        Correct Answer:- Option-B

No comments:

Post a Comment